Speedwerx Clutch Spring Life Washer - Steel or Nylon // Arctic Cat Snowmobile and Wildcat X/Trail/Sport
Recommended for all high performance and racing applications, these washers improve effieciency and prolong spring life by reducing the chances of the spring binding in the clutch Available in Steel or Nylon.
Speedwerx Clutch Spring Life Washer // Arctic Cat Snowmobile and Wildcat X/Trail/Sport
Recommended for all high performance and racing applications, these washers improve efficiency and prolong spring life by reducing the chances of the spring binding in the clutch as they naturally will try to rotate as they are compressed. Available in Steel or Nylon, these washers fit Arctic Cat Snowmobiles with Arctic 6 Post or 9 Post Primary Clutches and Wildcat X, Trail, and Sport with TEAM Primary Clutches. For the best results, we recommend using one Steel against the spider and cover and one Nylon on each end of the primary spring (four total). On Wildcat Trail and Sport Secondary Clutches, we recommend two Nylon in the spring pocket on the clutch sheave. Note: the effective spring rate will increase slightly with each washer added due to the added preload- the washers are approximately .030 thick each.
SOLD EACH - select the material from the menu, adjust the quantity, click "Add to Cart", and then repeat if you wish to purchase both types.
NOTE: Use pn SPXAPSLW for Arctic Cat Snowmobiles and Wildcat XX with TEAM or ADAPT primary clutches- see related items below.
| Manufacturer | Speedwerx, Inc. |
|---|
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov See Proposition 65 Information for more on this Consumer Product Exposure Warning for residents of California.
These items are intended for closed-course competition only. Alteration of emissions-related components can constitute violation of federal and/or state laws. Substantial fines and penalties can result if used for other than closed-course competition use.
