Speedwerx ECU Tunes // Arctic Cat ZR / RIOT / XF / M 8000 - 800 C-TEC2 / Yamaha Mountain Max 800
New 2021 Updated Stock Programming Now Available! Our ECU programs offer the most control to all of the hidden features in the stock ECU and allows us to produce the most power with the best throttle response and acceleration.
ECU Re-Mapping for Arctic Cat 8000 - 800 C-TEC2 Models
Our ECU programs replace the piggyback fuel controller in our Exterminator Kit performance packages. This offers the most control to all of the hidden features in the stock ECU and allows us to produce the most power with the best throttle response and acceleration.
New 2021 Updated Stock Programming Now Available! See vid below for more info. This flash was designed to correct the mid-range lean condition several customers have been complaining about on the 2021 models, but can be used on any stock 2020-2024 8000 C-TEC2 machine and ridden at any elevation. We do not claim any power increases with this but it definitely feels more responsive in the reworked areas. It runs at the same peak RPM as stock where other options on the market move the peak power down and make the machines feel sluggish and lazy because the engine and pipe are designed to run at 8100-8300 rpm. No clutching changes are needed with the updated programming since the operating RPM does not change, but our Hypershift Clutch Kits are definately a worthwhile upgrade for improved acceleration, backshifting, and all-around performance feel.
NOTE: Stage 1 and 2 Maps are for use only with the Speedwerx pipe and other components included in the Exterminator Kits, not for use on stock machines or with other aftermarket manufacturer's parts. Click here for more info- 8000 C-TEC 2 Exterminator Kits
You must send your ECU to us for re-mapping! Please include a note with your return address and order number. The return shipping cost for the service of your choice will be added when purchasing online.
Ship to:
Speedwerx, Inc.
20195 Greystone Avenue
Forest Lake, MN 55025
About ECU Tuning:
Throughout our extensive R & D experience, we found that recalibrating the ECU/ECM is the best way to get the most out of your machine. We do this by taking the time to go through the entire ECU and optimize it from the ground up. Something that was not commonly done in current ECU tuners. This way we can tune it to as close to perfection for every scenario to outperform your current programming configuration. Your machine will be tuned and perform just as well as a machine that was on the dyno and tested for months on end so that it excels in every situation to be smoother, faster, more efficient, and more reliable.
Sending us your ECU is always the easiest and preferred way to get it done, but for those that wish to purchase a tool to flash their own ECU, we are using the new industry leading EZ LYNK Auto Agent 3 system. This will not only allow you to flash your ECU but you can also do much more.
- Data Log live and record data to share with tuners or friends.
- Run diagnostics checks on your machine as well as several other powersports and over the road vehicles. (brand-specific cables required for other powersports machines)
- Reset power valves on Polaris 850 and 9r models.
- Flash your own ECU with optional ECU Flash Power-Up Adapter
Link to Instructions: How to Flash with your Auto Agent 3 Device
Get Connected with The World's Most Powerful Vehicle Scan Tool. EZ LYNK puts your technician in the front seat whenever and wherever you choose and is the vehicle interface for all EZ LYNK apps.
The EZ LYNK Auto Agent 3 Vehicle Diagnostic Scan Tool and Electronic Logging Device (ELD)
Who is it for?
Vehicle Owners - From 18 Wheelers to Powersports and everything in between. See what we offer for your Vehicle
Vehicle Technicians - Get Connected with your customer and their vehicles; Whenever and Wherever
Transport Companies - Owner Operator, Small and Large Fleet Sizes and even Bus Transport Companies
Commercial Motor Vehicle Drivers - Hotshot, Short Haul, Long Haul, Agricultural and Construction
60 Second Setup:
Plug the device into the Vehicle's OBDII Diagnostic Connector
Install the EZ LYNK Mobile App on your Android or iOS Device
Connect via WiFi
Diagnostic Scan Tool and More:
A Connected OBD Scan Tool for You and your Vehicle's Technician
Lynk with your Technician
View and Record Vehicle Data Parameters in Real Time
Share Recorded Data Logs with your Technician
Read and Clear Diagnostic Trouble Codes (DTC)
Perform Technician Recommended Vehicle Functions
Install Vehicle Firmware Updates provided by your Technician, Over-the-Air
Chat with your connected Technician, within the Auto Agent Mobile App
Auto Agent 3 w/ OBDII Connection
Devices and Software Compatibility:
Android 8.0 or Later
iOS 12.0 or Later
iPad
iPhone
iPod touch
Additional Accessories to expand the Auto Agent 3 Connection and Convenience:
Class 8, Medium and Heavy Duty (Semi) vehicles - Auto Agent 3 HD Cables (6 and 9 Pin Round)
ATV, UTV, SnowMobile and WaterCraft applications - Auto Agent 3 Powersports Diagnostic Cables and ECU Flash Power-Up Adapters
EZ LYNK Phone Window or Dash Mount - The phone mount that sticks!
EZ LYNK ELD system requires a monthly subscription
| Manufacturer | Speedwerx, Inc. |
|---|


